During the last two decades many companies have benefited from the installation of vacuum lifting in their place. A typical vacuum tube lifter can handle loads up to 500kg and can quite often proved to be very cost effective way to provide assistance when dealing with products such as bags, boxes, panels, drums, rolls and rolls, to name but a few. Not only lift vacuum system to ensure employers comply with health and safety regulations now, but often increase productivity by reducing process time and even reducing the labor needed to perform certain tasks.
Vacuum tube lifters All work on the same principle, where the vacuum is created and controlled in the host system. vacuum is a volume of empty space at the bottom of things, such that the pressure is much lower than the surrounding atmospheric pressure. By using a specially designed vacuum-style ‘concertina’ tubing, which contract and expand as the pressure change is likely to lift and position loads with minimal effort.
A vacuum lift system typically consists of a vacuum pump, vacuum supply hose, vacuum tubes, filters, head control and suction feet / legs. A vacuum lifter usually supported either from the basic swing jib crane or gantry system management overhead. After the vacuum pump starts and the product is gripped by the suction foot is possible to raise and lower the load just by opening and closing the valve on the control head. Once the product is raised it is possible to maneuver loads anywhere in the foothills of the gantry system.
Sorry, the comment form is closed at this time.